收藏我们   ENGLISH  
论文查询
范围:  
提 交
《化学分析计量》 2019年第01期
DOI:10.3969/j.issn.1008-6145.2019.01.002
溶液型非牛顿流体黏度标准物质的研制
邵鸿飞1,高岩立1,任万杰1,李艳玲1,刘元俊1,刘忠民2
1.中国兵器工业集团第五三研究所,济南 250031; 2.山东师范大学,济南 250014 
Preparation of viscosity standard reference materials for solution-type non-Newtonian fluid
邵鸿飞1,高岩立1,任万杰1,李艳玲1,刘元俊1,刘忠民2
1. CNGC Institute 53, Jinan 250031, China; 2. Shandong Normal University, Jinan 250014, China 
摘要:介绍溶液型非牛顿流体黏度标准物质的研制过程和定值方法。采用控温加热搅拌溶解的方法,在温度60 ℃,搅拌速率100 r/min的条件下,将聚异丁烯按照分步投料的方法溶解于正十二烷和2,6,10,14-四甲基十五烷组成的混合溶剂中,制备了4种溶液型非牛顿流体黏度标准物质,其黏度值分别为2.07,4.90,9.46,24.30 Pa·s,相对扩展不确定度小于3.0%(k=2),标准物质稳定性好,可用于旋转流变仪的校准和相关分析方法的评价。 
Abstract:The preparation process and characterization method of non-Newtonian fluid viscosity standard reference materials were introduced. Under the condition of 60℃and 100 r/min stirring speed, four solution-type non-Newtonian fluid viscosity reference materials were prepared by dissolving polyisobutylene in a mixed solvent of n-dodecane and 2, 6, 10, 14-tetramethylpentadecane, their viscosity values were 2.07, 4.90, 9.46, 24.30 Pa·s, respectively. The relative expanded uncertainty was less than 3.0% (k=2). The reference materials had characteristics of uniform distribution of values and high stability, which can be used for calibration of rotational rheometer and evaluation of relevant analytical methods. 
关键词:聚合物溶液;非牛顿流体;剪切黏度;标准物质 
Keywords:polymer solution; non-Newtonian fluid; shear viscosity; reference material 
本文引用格式:
邵鸿飞,高岩立,任万杰,等.溶液型非牛顿流体黏度标准物质的研制[J].化学分析计量,2019,28(1):6-8. 

全文:
相似文章:
  紫外可见波长溶液标准物质的研制
2024年第02期
  氮中六氟化硫气体标准物质制备
2024年第01期
  氮化硼化学成分标准物质研制
2024年第01期
  四氯乙烯中石油类溶液标准物质制备
2023年第10期
  甲烷中微量噻吩气体标准物质研制
2023年第08期
  硅青铜和铝青铜光谱分析标准物质的研制
2023年第08期
  黄豆黄素纯度标准物质研制
2023年第06期
  甲烷中甲硫醇气体标准物质的研制
2023年第05期
  甲醇中丙烯酸乙酯溶液标准物质制备
2023年第05期
  银精矿成分分析系列标准物质研制
2023年第01期
《化学分析计量》杂志社 版权所有,未经授权禁止复制或者建立镜像
地址:山东省济南市天桥区田庄东路3号 邮编:250031
电话:0531-85878132 85878224 85878278
鲁ICP备05018524号-6